Superwave Laser Technology Co.,Ltd is a professional China laser deep engraving machine manufacturer, with professional factory we are always able to offer you discount laser deep engraving machine with reliable quality.
Product Introduction
The fiber laser marker has a homogeneous
structure, any optical soiling, any power coupling losses and it has an air
cooling system. In contrast to other laser machines, this laser machine has a
high efficiency and reliability. Efficiency and a long duration of usage are the
main arguments for customer's choice and usage of this optical fiber laser
marking machine.
Essential features
The laser beam has an excellent quality: In
comparison with traditional laser marking machines, the laser marking machines
of series SW-FLM have the absolute superiority. The output for the base mould is
focused with a facular diameter less than 20nm. The divergence angle is ¼ of the
semiconductor pump laser. Especially suitable for precise and extremely precise
laser marking:
Low running costs:
The electrical light transfer efficiency
achieves 30% most greatly; the energy consumption is less than 800W, which is
1/10 by the lamp during laser marking pumped solids. The long-term use may save
a lot of disbursement of the users.
This laser machine has a long duration of life:
The fiber laser marking machines uses two
levels of tube achievement for pump source. This machine uses a unique pump
coupling technology and its averaged working time amount to 100,000
hours.
This laser machine has an exquisite volume and it is suitable for adverse circumstances:
The optical fiber laser machine has an extremely flexibility, designs extremely nimble and has a compact design. The glass fiber surface area / volume ratio is high and has a good effect of radiation. It is not necessary to use an enormous water cooling system - an air cooling system is sufficient. Even if attacking high, high vibration, high temperature, dust and other adverse circumstances, this laser machine continue normal work. Exempts the maintenance operation
Data Sheet:
Model | SW-FLM Fiber laser engraver series |
Mean laser power | 30W;40W;50W;70W,100W |
Laser wavelength | 1064nm |
Laser Repetition frequency | 20-100KHz |
Marking area | 110×110mm |
Marking size optional | 50x50mm,70x70mm,150x150mm,175x175mm,200x200mm |
Marking depth | ≤1mm |
Linear speed | ≤10000mm/s |
Min. line width | 0.01mm |
Min. letter | 0.2mm |
Repeatability | ±0.002mm |
Supported format | Support AI,PLT, DXF, BMP,JPG file, etc. |
Power supply | AC220V±10%/50Hz-60Hz, AC110V optional. |
Power consumption | 0.8KW-1.5KW |
Laser cooling | Air cooling |
Host dimension(L*W*H) | 1200x630x1400mm |